Spring Compressor Set
Product Name:
Spring Compressor Set
Product Number:
MG50073
General Info.
Compresor muelles amortiguador,automotive tools,spring pressure regulator,Compresor Muelles Amortiguador - Mercedes,Set compresseurs de ressorts suspension,Outillage,Federbeinspannersatz,prese arcuri,Smonta ammortizzatori per sospensioni Mercedes Benz,Ściągacz sprężyn zawieszeńa MERCEDES,Veerspanset Mercedes-Benz
Spring Compressor Set
Detailed Descriptions,
Spring Compressor For MERCEDES
Made in China
Drop forged yokes.heat treated
Telescopic construction with 3-point safety interlock and automatic freewheelat end of stroke
Maximum compression range 325mm.
Miniimum compression range 120mm
Spring
A spring is an elastic object used to store mechanical energy. Springs are usually made out of spring steel. Small springs can be wound from pre-hardened stock, while larger ones are made from annealed steel and hardened after fabrication. Some non-ferrous metals are also used including phosphor bronze and titanium for parts requiring corrosion resistance and beryllium copper for springs carrying electrical current (because of its low electrical resistance).
When a spring is compressed or stretched, the force it exerts is proportional to its change in length. The rate or spring constant of a spring is the change in the force it exerts, divided by the change in deflection of the spring. That is, it is the gradient of the force versus deflection curve. An extension or compression spring has units of force divided by distance, for example lbf/in or N/m. Torsion springs have units of force multiplied by distance divided by angle, such as N·m/rad or ft·lbf/degree. The inverse of spring rate is compliance, that is: if a spring has a rate of 10 N/mm, it has a compliance of 0.1 mm/N. The stiffness (or rate) of springs in parallel is additive, as is the compliance of springs in series.